StrongMesh™ Wireless Communicating Thermostat
Replacement is the X5N-SM
Features
- Automatic Changeover from Heat-to-Cool and Cool-to-Heat
- 2 Occupied (Day-Cool & Day-Heat) and 2 Unoccupied (Night-Cool & Night-Heat) Setpoints
- Selectable Fahrenheit or Celsius Display
- Commercial Lockout with 1 or 3 Hour Override, with +/-3F Temp Adjustment
- Lockable Access Cover
- Plenum Fan Switch
- HVAC equipment control using dry contact relays
- 3 LED lights; LED1 & LED2 are triggered via 2 Digital Inputs which can be use for Equipment Faults, Dirty Filter, Condensate Overflow or any other contact closure input; LED3 is used exclusively for Emergency Heat notification
- Up to 6 Remote Indoor Sensors (NT-TEMP or NT-IDS) and 1 Outdoor Sensor (NT-TEMP + NT-OUTDOOR probe)
- Optional Occupancy Sensors Available (Ceiling and Wall Mount)
- Integrated NetX™ API language, Allowing for Development of 3rd Party Apps
Specs
Rated Voltage: 20V to 30VAC, 24VAC nominal
Rated A.C. Current: 0.05 to 0.75 Amp continuous, per output, surges to 3 Amps max.
Rated D.C. Current: 0.05 to 0.75 Amp continuous, per output, surges to 3 Amps max.
Control Range:
• Heating: 38 to 88°F in 1° steps (6 to 30°C in 1° steps)
• Cooling: 60 to 108°F in 1° steps (16 to 40°C in 1° steps)
Sensing Range: 20 to 124°F (0 to 48°C)
Control Accuracy: +/-1°F @ 68°F (0.5°C @ 20°C)
Minimum Heat/Cool Deadband: 2°F (1°C)
Dimensions: 4.5”H x 4”W x 1”D (114mm x 102mm x 26mm)
Thermostat LEDs: LED1 - Red, LED2 -Red, LED3 - Red
Equipment Terminations: R-24V switching voltage, W1 - Aux/Emergency Heat, G - Fan, Y1 - Compressor1, Y2 - Compressor2, O - Energizes Reversing Valve in Cooling Mode, B - Energizes Reversing Valve in Heating Mode
Power Terminations: 24V - isolated remote power, 24V(c) - power common (from HVAC equipment or remote power)
Thermostat Communications: StrongMesh™ wireless communications
Description
3-Heat/2-Cool for Heat Pump HVAC Systems with Normal or Dual Fuel Applications
Setback Thermostat with StrongMesh™ Wireless Communications
Secure Direct Connection via any NetX Network Controller & Wireless Coordinator
The HP32-SM communicating setback thermostat is designed for new and replacement commercial or residential heat pump applications. The HP32-SM controls heat pump HVAC equipment with either electric or gas for auxiliary and emergency heat. Using the NetX™ network controller with a WCM-2 Wireless Coordinator and the NetX™ Command Center software for XBus™ and StrongMesh™ thermostats, NetX™ makes it simple with near effortless changes to each setting on the thermostat. The pushbuttons on the thermostat can be locked to give restricted override capabilities, and the optional Occupancy Sensor enables automatic energy savings.