Features
Energy Savings
- Efficient Equipment Restart™ randomizes equipment starts to minimize multiple units turning on simultaneously when there are multiple NetX thermostats at the location
- Random Restart on power up staggers restart of HVAC system after a power outage to minimize peak in-rush current
Monitoring
- 11 Remote Sensors: up to 6 indoor, 1 humidity, 1 outdoor, and up to 3 auxiliary sensors for monitoring items such as supply air, return air, walk-in refrigerators and freezers, etc.
- 2 Digital Inputs for Fault Conditions, including Condensate and Equipment Faults
- Occupancy Sensor Input
Connectivity
- StrongMesh™ Self-Healing Wireless Mesh Network Communications with the WCM-2 Wireless Coordinator
- NetX Command Center™ Software for Local Internal Network and Port Forwarded Access
- Integrated NetX™ API
Facility Management
- Commercial Lockout with Programmable Temporary Override Time and Temperature Range Adjustment
- 2 Occupied (Day-Cool & Day-Heat) and 2 Unoccupied (Night-Cool & Night-Heat) Setpoints
General
- Color Selectable Touchscreen Display
- Modes: Heat, Cool, Automatic Changeover, and Off
- Integrated Humidity Sensor
- Fan Selector for Automatic or Continuous Fan Operation; Programmable Recirculation Fan
Specs
Rated Voltage:
20V to 30VAC, 24VAC nominal
Rated A.C. / D.C. Current:
0.05 to 0.75 AC / 0.0 to 0.75 DC Amp continuous, per output, surges to 3 Amps maximum
Temperature Control Range:
- Heating: 38°F to 88°F (4°C to 31°C) in 1° steps
- Cooling: 60°F to 108°F (16°C to 42°C) in 1° steps
Thermostat Sensing Range:
32°F to 118°F (0°C to 48°C) Control Accuracy: ±1°F @ 68°F (±0.5°C @ 20°C)
Minimum Deadband:
2°F (1°C)
Dimensions:
5.1”H x 4.7”W x 1.15”D (130mm x 119mm x 29mm)
Equipment Terminations:
R - 24V switching voltage, W1 - Heat1 or Aux/Emer Heat, G - Fan, Y1-Compressor1, Y2 - Compressor2, O/W2 - Heat2 or Rev. Valve in Cooling, B - Rev. Valve in Heating
Power Terminations:
24V - remote power (not used), 24V(c) - power common (from HVAC equipment)
Input Terminations:
LED1 (Filter Icon Selectable), LED2 (Fault Icon Selectable)
Occupancy Terminations:
CLK1 ( + ), CLK2 ( - )
Remote Sensor Terminations:
RS+V - Power, RS2 - Return, RS1 - Data
Radio:
(802.15.4) 2.4GHz IEEE 802.15.4
Description
- Full Color Touchscreen
- Standard (Gas/Electric) up to 2H/2C
- Heat Pump (Standard or Dual Fuel) up to 3H/2C
- Humidity Sensing
- Up to 11 Sensors via Advanced Sensor Bus
- Integrated NetX™ StrongMesh™ Communications
- Direct replacement for the US32-SM
The X5N-SM is a communicating setback color touchscreen thermostat designed for new or replacement commercial or residential applications. Our integrated logic for both conventional and heat pump applications may be configured for up to three (3) stages of heating and two (2) stages of cooling with an advanced remote sensor bus. The X5N-SM is a direct replacement for the US32-SM thermostat.
The X5N-SM is designed to operate as a stand-alone unit or be controlled using any NetX™ NT-IPXB network controller, one or more NetX™ WCM-2 StrongMesh™ wireless coordinator and the NetX™ Command Center software. For maximum security, the X5N-SM may be controlled and operated behind your firewall. For ultimate control over energy usage, the X5N-SM offers a digital lockout that permits limited temperature overrides based on your requirements. The advanced remote sensor bus allows up to 6 indoor remote sensors, humidity sensor, outdoor sensor, and up to 3 auxiliary sensors for needs such as supply air, return air, water temperature, walk-in freezers and refrigerators, and any other temperature monitoring desired.